• page_banner
  • page_banner


Common use of solar cable in PV systems


In recent years, the application of solar power (PV) generation has grown rapidly, and the main equipment in the construction process of the power station in the light source, except for the light source structure, the reverse transformer, and the booster voltage transformer, has been installed in the photovoltaic power station as a whole. Efficient performance, operational safety, high efficiency, together with the important effects of the arrival and departure, the general electrical and material usage and usage environment in the light-low voltage station are introduced in detail.


A large amount of DC power supply is installed in the photovoltaic power station. Common materials are used for a long period of time in such environments, so it is easy to install the electric switch in the future. This kind of information is directly connected to the power supply system, and at the same time, the large power supply and short-circuit wind are increasing, so it can be seen for a long time, and the possibility of causing fire or human injury is also high, and the service life of the system has a large impact.


For this reason, it is very necessary to use light-fed voltage isolation parts in a light-fed current station. With the continuous development of the light-emitting industry, the light-bearing parts market is gradually forming, the two words of the electric power industry have been developed, and the multi-dimensional light-bearing industrial electric accessories have been developed. Recently researched and developed electron flux cross-connection cable, constant temperature up to 120, resistant to bad air weather environment and machine crash. In addition, the RADOX cable is a kind of solar power cable based on the international standard IEC216, which has a service life of 8 times for the external environment, and 32 times for the PVC cable. Optimal rain resistance, UV resistance and odor resistance, and capable of accepting large temperature changes (e.g. from -40 to 125°C). In Europe, technicians pass the test, the temperature obtained on the roof can be measured as high as 100-110.

Post time: Dec-06-2022